Danish Interpretation Systems
Installation Manual
Manual 01 19 78010
10
12.
Camera Presets Setup
The screen is used to save the preset for each microphone.
How to save presets:
1.
Turn on one microphone (the number will be shown
in the “seat no.” field).
2.
Click on the ‘Camera Control’ button to switch to the
‘Camera Control’ sub page
3.
Select the camera to use.
4.
Move the camera to a desired position
5.
Press “Save”. The Preset for the seat is now saved.
6.
Repeat step 3-5 for more camera presets for the
same seat if desired
7.
Turn of the microphone and repeat the steps 3-6 for
the next microphone.
8.
Continue step 3-6 for all microphones (seats)
9.
Turn off all microphones
10.
Select “Save”. Preset 400 shall now be saved for
camera 1 (preset 400 is the preset for the overview
position).
11.
Go to ‘Room Layouts’ and save the layout.
Instead of switching microphones on/off as described above
the seat can also be selected using the keypad on the ‘Select
Seat’ sub page. And then the next seat can be selected using
the buttons ‘select seat’: prev/next
The ‘Test seat preset’ is used to recall the stored camera
preset for the selected seat.
The ‘Delete’ button deletes a stored preset
Use the icon in the top left corner to return to the Main Menu
‘Select Seat’ sub page
‘Camera Control’ sub page
