Daniels VT-3/140-SWA2, Instruction Manual

Page: 37 / 262

Transmitter Main Board Instruction Manual 2-7
The time-out duration is jumper selectable from 1 second to 8 hours. The positions of the jumpers
on the top (Through hole component) side of the Transmitter Main Board. Table 2-1 shows the
time-out duration in minutes for the various jumper settings which are listed as enabled (E: jumper
shorted - in) or disabled (D: jumper left open - out). The standard factory setting of 5 minutes is
shown in bold type in table 2-2.
Table 2-1 Time-Out-Timer Settings
D = DISABLED (no solder jumper installed), E = ENABLED (solder jumper installed). Bold text
represents default settings.
TIME-OUT DURATION
(MINUTES)
J26 = E J26 = D J26 = E
J32 J31 J29 J28 J27 = D J27 = E J27 = E
E E E E 0.01 0.01 0.01
E E E D 0.02 0.03 0.01
E E D E 0.04 0.06 0.02
E E D D 0.08 0.12 0.05
E D E E 0.15 0.23 0.10
E D E D 0.31 0.47 0.19
E D D E 0.62 0.94 0.38
E D D D 1.25 1.88 0.75
D E E E 2.5 3.75 1.5
D E E D 5.0 7.5 3.0
D E D E 10 15 6.0
D E D D 20 30 12
D D E E 40 60 24
D D E D 80 120 48
D D D E 160 240 96
D D D D 320 480 192