Daniels VT-3/140-SWA2, Instruction Manual

Page: 7 / 262

VHF Enhanced Transmitter Instruction Manual VT-3 132 - 174 MHz 1-3
1.4 Performance Specifications
invisible text
1.4.1 General
The following is a general set of specifications for the generic VT-3/150 transmitter. Additional
specifications, specific to individual modules may be found in their respective submanuals.
Type: MT-3 Series Transmitter.
Family: VT-3/150.
Compatibility: MT-2 Series and MT-3 Series Radio Systems.
Frequency Range: 132 to 174 MHz.
RF Power Output: Adjustable: 0.5 to 2.0 W and 2.0 to 8.0 W.
Modulation: 11K0F3E or 16K0F3E (Frequency Modulation).
System Impedance: 50
Ω
; Type N connector.
Duty Cycle: 100%; Continuous operation from -40°C to +60°C.
Spurious Emissions: More than 80 dB below carrier.
Harmonic Emissions: More than 90 dB below carrier.
Transmitter Mismatch Protection: 20:1 VSWR at all phase angles.
Transmitter Alarm: Forward power sense and reverse VSWR;
• open collector output (separate or 'OR'ed
configuration);
• linear output (separate lines only).
Operating Temperature Range: -30˚C to +60˚C, optional -40˚C temperature test.
Operating Humidity: 95% RH (non-condensing) at +25°C.
Operating Voltage: +13.8 Vdc Nominal (range +11 to +16 Vdc),
+9.5 Vdc Regulated.
Transmit Current: 2.5 Amps at 8 Watts RF Power Output.
Front Panel Controls: NORM (repeat mode), OFF, and KEY TX (Tx on).