MT-4E VHF & UHF Receiver & Transmitter Instruction Manual
IM08-MT-4E-TXRX-P1162
ii
This document has been produced, verified and controlled in accordance
with Daniels Electronics’ Quality Management System requirements.
Please report any errors or problems to Daniels Electronics’ Customer
Service Department.
DOCUMENT CONTROL
The user’s authority to operate this equipment could be revoked through
any changes or modifications not expressly approved by Daniels
Electronics Ltd.
The design of this equipment is subject to change due to continuous
development. This equipment may incorporate minor changes in detail
from the information contained in this manual.
Operation is subject to the following two conditions: (1) this device may
not cause interference, and (2) this device must accept any interference,
including interference that may cause undesired operation of the
device.
NOTE
DOCUMENT REVISION
DEFINITION
Daniels Electronics Ltd. utilizes a three-level revision system. This
system enables Daniels to identify the significance of a revision.
Each element of the revision number signifies the scope of change as
described in the diagram below.
Major Revisions:
The result of a major change to
product function, process or requirements.
Minor Revisions:
The result of a minor change to
product, process or requirements.
Editorial Revisions:
The result of typing corrections or
changes in formatting, grammar or wording.
1-0-0
Three-level revision numbers start at 1-0-0 for the first release. The
appropriate element of the revision number is incremented by 1 for each
subsequent revision, causing any digits to the right to be reset to 0.
For example:
If the current revision = 2-1-1 Then the next major revision = 3-0-0
If the current revision = 4-3-1 Then the next minor revision = 4-4-0
If the current revision = 3-2-2 Then the next editorial revision = 3-2-3
The complete revision history is provided at the back of the document.
