Daniela DAN9TM, User Manual

Page: 25 / 32

P I 02 9604 1226 E I sales@danielaappliances.com.au W | danielaappliances.com.au
PAG E 2 5
8.2 Before locating the fixing brackets
• The unit should be placed on a stable, smooth surface (use the packaging). Do not apply force
onto the controls protruding from the hob.
• Fix the hob on the work surface by screw four brackets on the bottom of hob (see picture) after
installation.
There are ventilation holes around outside of the hob. YOU MUST ensure these holes are not
blocked by the worktop when you put the hob into position.
• Be aware that the glue that join the plastic or wooden material to the furniture, has to resist to
temperature not below 150
℃
, to avoid the unstuck of the paneling.
• The rear wall, adjacent and surrounding surfaces must therefore be able to withstand an
temperature of 90
℃
.
A B C D
screw bracket Screw hole base