P
I
02 9604 1226 E
I
|
danielaappliances.com.au
PA G E 1 0
•
The plug and socket must be easily accessible. IMPORTANT.
•
If the oven is to work properly, the kitchen housing must be suitable.
•
The panels of the kitchen unit that are next to the oven must be made of a heat resistant
material.
•
Ensure that the glues of units that are made of veneered wood can with stand
temperatures of at least 120ºC.
•
Plastics or glues that cannot withstand such temperatures will melt and deform the unit,
once the oven has been lodged inside the units, electrical parts must be completely
insulated. This is a legal safety requirement.
•
All guards must be firmly fixed into place so that it is impossible to remove them without
using special tools.
•
Remove the back of the kitchen unit to ensure an adequate current of air circulates around
the oven. The hob must have a rear gap of at least 45mm.
TECHNICAL SPECIFICATIONS
Inner dimensions of the oven:
• Width 65.7cm
• Depth 43.5cm
• Height 35.1cm
Inner Volume of the oven 105 litres
Voltage and Frequency of Power Supply: 220-240V ~50/60Hz or 50H
• DURING USE THE APPLIANCE BECOMES HOT! CARE SHOULD BE
TAKEN TO AVOID TOUCHING HEATING ELEMENTS INSIDE THE OVEN.
• ACCESSIBLE PARTS MAY BECOME HOT DURING USE. YOUNG
CHILDREN SHOULD BE KEPT AWAY.
• DO NOT USE HARSH ABRASIVE CHEMICALS OR SHARP METAL
SCRAPERS TO CLEAN THE OVEN GLASS!!! THEY CAN SCRATCH THE
SURFACE, WHICH MAY RESULT IN THE SHATTERING OF THE GLASS.
