P
I
02 9604 1226 E
I
|
danielaappliances.com.au
PA G E 1 1
If the display flashes
alternately with the heat setting
This means that:
• you have not placed a pan on the correct cooking zone or,
• the pan you’re using is not suitable for induction cooking or,
• the pan is too small or not properly centered on the cooking zone.
No heating takes place unless there is a suitable pan on the cooking zone.
The display will automatically turn off after 1 minute if no suitable pan is placed on it.
FINISH COOKING
Touching the heating zone selection
control that you wish to switch off.
Turn the cooking zone off by touching the slider to the left.
Make sure the display shows “0”.
Turn the whole cooktop off by touching the ON/OFF control.
Beware of hot surfaces.
“H” will show which cooking zone is hot to touch. It will disappear
when the surface has cooled down to a safe temperature. It can also
be used as an energy saving function if you want to heat
further pans, use the hotplate that is still hot.
