DANIEL 2500, User'S Reference Manual

Page: 156 / 162

______________________________________________________ ______________________________________________________ MODEL MODEL 2500 2500
ENTRY EXPLANATION
-T-
TAPLOC# TAPLOC# provides for choosing the tap location for
orifice meter runs. Multiple runs may be designated by
number or letter suffixes (accompanied with the symbol
# in TAPLOC#). For example, TAPLOC1 is the variable
name used to select the tap location for run number 1.
The selections for TAPLOC# are UPSTREAM and
DNSTREAM (downstream).
TAPTYPE# TAPTYPE provides an operator selection entry for
choosing the tap type for orifice meter runs. The
selections for TAPTYPE# are pipe and flange.
TESTPULS TESTPULS provides a turbine meter test signal. The
selections are ON, which initiates the test signal, and
OFF, which turns off the signal.
_ __ __ __ __ __ __ __ __ __ __ __ __ __ __ __ __ __ __ __ __ __ __ __ __ __ __ __ __ __ __ __ __ __ __ __ __ __ __ __ __ __ __ __ __ __ __ __ __ __ __ __ __ __ __ __ __ __ __ __ __ __ __ __ __ __ __ __ _
APPENDIX APPENDIX C C
142