DANIEL 2500, User'S Reference Manual

Page: 48 / 162

______________________________________________________ ______________________________________________________ MODEL MODEL 2500 2500
LOWER-LEVEL SECURITY PASSWORD
If the security switch, which is located at the rear of CPU I/O board, is in the
center position, an operator must enter the lower-level security password before
entering or changing variable values in the system.
The lower-level security
password remains active for five minutes after the last key is pressed. The system
command "Unit Lock" disables the unit password and the password must be entered
again in order to change data.
When the instrument is downloaded, the default lower-level password is eight 1s,
(11111111). Installing a new, user-originated, lower-level password at the initial
startup of the MODEL 2500 system, is recommended.
_ __ __ __ __ __ __ __ __ __ __ __ __ __ __ __ __ __ __ __ __ __ __ __ __ __ __ __ __ __ __ __ __ __ __ __ __ __ __ __ __ __ __ __ __ __ __ __ __ __ __ __ __ __ __ __ __ __ __ __ __ __ __ __ __ __ __ __ _
SECTION SECTION 3 3
34