38
www.Daniel.com
SERIES 1200 LIQUID TURBINE METER
4
Prepare the turbine meter for use
4.1
Lifting conditions
WARNING
CRUSHING HAZARD
During turbine meter installation or removal, always place the unit on a stable platform
or surface that supports its assembled weight.
Failure to comply could allow the turbine meter to roll, resulting in death, serious injury
or equipment damage.
WARNING
LIFTING HAZARD
The lifting instructions are for installation and removal of the Daniel Liquid Turbine
Meter only and do not address lifting the turbine meter while it is attached or bolted to
piping.
Failure to comply with these instructions may result in death, serious injury, or
equipment damage.
CAUTION
FORKLIFT HAZARD
Do not insert the forks of a forklift into the bore when moving the turbine meter.
Inserting the forks may cause the meter to become unstable, resulting in serious injury
or equipment damage.
Table 4-1: Lifting and installation conditions
Conditions
Description
Lighting and ventilation
Install the turbine meter in a well lit and ventilated location, not
less than one meter (approximately three feet) from source of
ignition or source of heat which might damage the unit.
Work area clearances and
installation height restrictions
Refer to
Minimum clearances for installation, operation and
maintenance
.
Surface considerations
Stable surface.
Soil/floor loadings and
product/piping support
Follow local procedures that meet the standards for soil/floor
loading and product/piping support.
User manual
Prepare the turbine meter for use
P/N 3-9008-513
September 2020
User manual
41