APP-control v10.x
4
Obligation and liability
The APP-control has been developed and manufactured according to the
current technical status and the recognized safety rules. It cannot be assured,
however, that the APP-control will operate as intended under all circumstances,
at any time and under all conditions.
The DANHAG APP-control is manufactures in compliance with the EU directive
2011/65/EG (RoHS 2). this directive determines the use of hazardous material
in devices and components.
The compliance with the prescribed EMC limit values was confirmed by an
independent EMC testing laboratory.
Our products are recorded in the register for waste electrical equipment and
meet the requirements of the relevant, applicable CE regulations. We confirm
the observation of European standards on our devices by the CE marking. WEEE
Reg. No.: DE 33181931
We only use sales packaging licensed by the disposal company
“Zentek duales System”
.
7 - 32
Do not use the APP-control for the switching of life-
support systems or devices with an emanating danger due
to an uncontrolled switching on and off.