APP-control v10.x
11.2
Connection of ext. button
The button / switch is connecting PIN6 (+12V) with PIN5 of the 14-pole
connector. There is a ground signal on PIN4 present as long as the switching
output is active. PIN4 has a resistor integrated to drive a LED directly.
11.2.1
Difference between button and switch
Button:
Pressing the button shortly (approx. 1s) will switch on the heater for
the preset time. If you want to switch of the heater you have to press the
button once again.
Switch:
The heater is running as long as the switch is closed, but max. for the
preseted time.
17 - 32
white
green
brown
DANHAG button
14pol. connector of APP-control
1 7
14 8
