Supported transmission rates (continued)
EDGE
236 Kbit/s
236 Kbit/s
UMTS
384 Kbit/s
384 Kbit/s
HSDPA
-
7.2 Mbit/s
HSUPA
5.7 Mbit/s
GNSS connection
The WS unit has an integrated GNSS receiver for position determination that supports the GNS systems
GPS, GLONASS and Galileo in the future via firmware update when it is ready. The latest version of GNS
systems allows simultaneous viewing of two GNS-systems and additionally supports the Chinese GNS-
system BeiDou.
The RF signal from the active GNSS receiver antenna is connected via a SMA connector at the same time,
the active antenna is supplied through this connector.
3-axis accelerometer
The device has a 3-axis accelerometer that can measure continuous acceleration values in the normal
fashion:
•
Measuring range > = ± 16g
•
Resolution > = 10 bit
•
sampling rate > = 10Hz
•
tolerance < = 2% of full-scale value (@ 25 °C)
The acceleration sensors register and evaluate accelerations in the X, Y, and Z axes, and send them via the
CAN bus.
The axis reference versus are showed in the following image:
P301 770
Interface for micro-SD card
The micro-SD card interface remains internally in the housing.
Technical Information
WS 403 Remote Solution
WS 403 functionalities
©
Danfoss | March 2016
L1426375 | BC00000241en-US0203 | 17