1
2
3
4
e3
0b
g4
58
.1
1
Illustration 133: Brake Connector on SDM 511/SDM 512
Table 130: Brake Connector on SDM 511/SDM 512
Connector name
Description
Pins
Ratings/Notes
Mechanical brake and mo-
tor temperature sensor con-
nector
Used to connect the mo-
tor's mechanical brake (if
present).
See
.
Nominal voltage: 24 V
Maximum (peak) voltage: 48 V ±10%
Maximum brake current: 2.5 A
Conductor cross-section range: 0.2–1.5 mm
2
(AWG 24–
AWG 16)
Table 131: Pin Assignment of Mechanical Brake and Motor Temperature Sensor Connector on SDM 511/SDM 512
Pins
Description
Notes
Rating/parameter
1
TEMP–
Used to connect the motor's temperature
sensor (if present).
KTY83–110
KTY84–130
PT1000
2
TEMP+
3
BRAKE–
Used to connect the motor's mechanical
brake (if present).
Nominal voltage: 24 V
Maximum (peak) voltage: 48 V ±10%
Maximum brake current: 2.5 A
Conductor cross-section range: 0.2–1.5 mm
2
(AWG 24–AWG 16)
4
BRAKE+
NOTICE
-
The motor temperature measurement can either be connected to the motor feedback connector (see
) or the brake and motor temperature sensor connector on the servo drive module SDM 511/
SDM 512. The connectors cannot be connected in parallel.
Specifications
Operating Guide | VLT® Multiaxis Servo Drive MSD 510 System
AQ262450196490en-000101 / 175R1170
216 | Danfoss A/S © 2019.10
Summary of Contents for VLT MSD 510
Page 1: ...Operating Guide VLT Multiaxis Servo Drive MSD 510 System...
Page 2: ......