Danfoss VLT Midi Drive FC 280 User Manual Download

Page: 2 / 4

Installation

Enclosure Sizes K1, K2, and K4

Grab the center handle on the fan and use a flat-
edged screwdriver to release the retaining lever.

Illustration 1.1 Removing Fan on Enclosure Sizes K1, K2, and K4

Unplug the fan cable.

Illustration 1.2 Fan Cable Plug. Plug Location Depends on Fan

Type.

NOTICE

For VLT

Midi Drive FC 280, the fan cable has 3 wires.

Connect the new fan cable and click the new fan
into place.

Enclosure Size K3

Remove the M3x6 screw in the bottom right corner.

Illustration 1.3 Removing Fan Screw on Enclosure Size K3

Press the levers on each side of the fan and pull the
fan outwards.

Illustration 1.4 Pulling out Fan on Enclosure Size K3

Installation Instructions

Fan Replacement
VLT

Midi Drive FC 280

MI07D102

Summary of Contents for VLT Midi Drive FC 280

Page 1: ...which can remain charged even when the frequency converter is not powered High voltage can be present even when the warning LED indicator lights are off Failure to wait the specified time after power...

Page 2: ...Type NOTICE For VLT Midi Drive FC 280 the fan cable has 3 wires 3 Connect the new fan cable and click the new fan into place Enclosure Size K3 1 Remove the M3x6 screw in the bottom right corner Illust...

Page 3: ...right and upper left corners Illustration 1 6 Removing Fan Screws on Enclosure Size K5 2 Grab the center handle and pull the fan outwards 3 Unplug the fan cable Illustration 1 7 Fan Cable Plug Plug L...

Page 4: ...ucts already on order provided that such alterations can be made without subsequential changes being necessary in specifications already agreed All trademarks in this material are property of the resp...