Danfoss VLT Brook Crompton Motor FCM 300, Design Manual

Page: 28 / 102

2.3.5 Potentiometer Option (177N0011)
Option to control the reference by means of a potenti-
ometer. The option is mounted instead of a cable bracket.
The potentiometer is operated by removing the blind plug
to set the desired reference, and then mount the blind
plug again.
Illustration 2.10
Colour of wire Terminal on X101
White 2 (analog input)
Red 8 (0 V)
Black 7 (+10 V)
Table 2.23
2.3.6 Local Operation Pad (LOP)
(175N0128) IP65
Illustration 2.11
Colour of wire Terminal Function
White 2 Reference
Brown 3 Reset
Purple* or Grey 4
See Illustration 2.11
Green 5
Red 6 +24 V
Yellow 7 +10 V
Blue 8 Ground
* Can be orange in some cables
Table 2.24 Wiring
Illustration 2.12 Local Operation Panel (LOP) 175N0128 IP 65
Illustration 2.13 Fixture for LOP 175N2717 (included in
175N0128)
Installation
VLT
®
DriveMotor FCM Series
26 MG03BA02 - VLT
®
is a registered Danfoss trademark
2 2