VLT
®
Series 2000
12
Operation
The and keys are used for scrolling through
Groups, Parameters and Data Value selections. Additionally
these keys are used for speed up and down when operating
in Local mode.
Local Stop: Local Stop is accomplished by pressing the
Stop/Reset key on the front control panel. The local stop
command has been designed to override all run signals
whether local or remote. When a local stop has been made
the top line of the display will flash. The only way to resume
running from a local stop condition is to initiate a local start.
Local Forward/Reverse: Local Forward/Reverse will be
automatically disabled if remote operation is selected. In
remote, it is not possible to make direction changes from
the keypad.
The MENU MODE is used to select and change operating
parameters. The and keys are used in the
MENU MODE to select a parameter group or an individual
parameter or the data value of a given parameter.
Group Description
Parameters
0
Operation and Display
000-099
1
Load and motor
100-199
2
Reference and limits
200-299
3
Functions and timers
300-399
4
Input and Output
400-499
5
Serial data interface
500-599
6
Service and diagnostics
600-699
is used to enter MENU MODE from either DATA
MODE or DISPLAY MODE. MENU is also used for entering
a specific group of parameters.
is used for entering DATA MODE or DISPLAY
MODE from MENU MODE. DATA is also used to move the
cursor in data values.
Four keys are provided for local control:
With theexception of the Start key the keys can be
programmed to be enabled or disabled to prevent unwanted
use in certain applications.
The VLT will be in DISPLAY MODE when the motor is
running in normal operation. DISPLAY MODE provides
various information concerning the current status of the VLT
and motor.
The and keys are used to scroll among
the 12 main display readouts:
• Reference
• Frequency Hz
• Display Feedback unit
• Current A
• Torque %
• Power kW
• Power HP
• Energy kWH
• Output voltage V
• DC voltage V
• Motor ETR value %
• Inverter ETR value %
Programming Keys
Data
Operator Keys
Fwd
Rev
Menu
–
+
Start
Stop
Reset
Jog
Operational Modes
+
–
–
+
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
