Danfoss VACON NX, Application Manual

Page: 147 / 360

Index Parameter Min Max Unit Default ID Description
P2.7.23 Response to slot fault 0 3
-
2 734 See P2.7.21
P2.7.24 No. of PT100 inputs 0 3
-
0 739 0 = Not used
1 = Channel 1
2 = Channel 1 & 2
3 = Channel 1 & 2 & 3
P2.7.25 Response to PT100 fault 0 3
-
0 740 0 = No response
1 = Warning
2 = Fault,stop acc. to 2.4.7
3 = Fault,stop by coasting
P2.7.26 PT100 warning limit -30.0 200.0 ºC 120.0 741
-
P2.7.27 PT100 fault limit -30.0 200.0 ºC 130.0 742
-
8.4.9 Auto Restart Parameters (Control Panel: Menu M2 -> G2.8)
Table 107: Auto Restart Parameters, G2.8
Index Parameter Min Max Unit Default ID Description
P2.8.1 Wait time 0.10 10.00 s 0.50 717 -
P2.8.2 Trial time 0.00 60.00 s 30.00 718 -
P2.8.3 Start function 0 2
-
0 719 0 = Ramp
1 = Flying start
2 = According to P2.4.6
P2.8.4 Number of tries after undervoltage trip 0 10
-
1 720 -
P2.8.5 Number of tries after overvoltage trip 0 10
-
1 721 -
P2.8.6 Number of tries after overcurrent trip 0 3
-
1 722 -
P2.8.7 Number of tries after 4 mA reference trip 0 10
-
1 723 -
P2.8.8 Number of tries after motor temperature fault trip 0 10
-
1 726 -
P2.8.9 Number of tries after external fault trip 0 10
-
0 725 -
P2.8.10 Number of tries after underload fault trip 0 10
-
1 738 -
AB296635287482en-000301 / DPD00903 | 147 Danfoss A/S © 2023.02
Pump and Fan Control Application
VACON® NX All-in-One
Application Guide