Vacon 20 X - Simple operator panel
vacon • 3
Service support: find your nearest Vacon service center at www.vacon.com
1
Figure 3. Simple operator panel connected.
7
•
Connect the GROUND wire to the proper terminal (see the yellow-green cable
on Figure 3.
8
•
Connect the cables from the potentiometer and from the selector to the I/O
control terminals. The cables have to be connected to the I/O terminals as
shown in the Figure 3 and in the Table 2.
9
•
RED, BLUE and BLACK wires are signals from the potentiomenter.
10
•
YELLOW, WHITE and GREY wires are signal from the selector switch.
