Danfoss TP9, Installation Instructions Manual

Page: 25 / 96

25
Temporary User Overrides
Sometimes you may need to change the way you use your
controller temporarily, i.e. due to an unexpected demand for hot
water or unusually cold weather. The TP9 has two convenient
overrides which can be selected without affecting the set
programme.
Hot Water
Pressing the +1HR button when the
hot water is ON will extend the ON
period by an hour. Pressing this button
when the hot water is OFF will turn the
hot water ON for just one hour.
When the +1 HR ON button is pressed,
an O symbol appears in the display.
Heating
To temporarily over-ride the
programmed temperature, use the
or
buttons to increase or decrease
the temperature as required.
An up or down arrow will appear in
the display as a reminder that the
programme is over-ridden. The selected
temperature will last until the next
programmed change.