Operating Guide
Termix BTD RO MIX
4.3 Electrical connections
Before making electrical connections, please note the
following:
Safety notes
Please read the relevant parts of the safety notes.
230 V
The substation must be connected to 230 V AC and earth.
Potential bonding
Potential bonding should be carried out according
to 60364-4-41:2007 and IEC 60364-5-54:2011.
Bonding point on the mounting plate below right corner marked
with earth symbol.
Disconnection
The substation must be electrically connected so that it can be
disconnected for repairs.
Outdoor temperature sensor
Outdoor sensors should be mounted so as to avoid exposure to
direct sunlight. They should not be placed close to doors, windows
or ventilation outlets.
The outdoor sensor must be connected to the station on the
terminal block under the electronic control.
Authorized electrician
Electrical connections must be made by an authorized electrician only.
Local standards
Electrical connections must be made in accordance with current
regulations and local standards.
Danfoss District Energy
VI.HE.F2.02 / LUK40661
DEN-GT
7
Summary of Contents for Termix BTD RO MIX
Page 20: ...Operating Guide Termix BTD RO MIX 20 DEN GT VI HE F2 02 LUK40661 Danfoss District Energy...
Page 21: ...Operating Guide Termix BTD RO MIX Danfoss District Energy VI HE F2 02 LUK40661 DEN GT 21...
Page 22: ...Operating Guide Termix BTD RO MIX 22 DEN GT VI HE F2 02 LUK40661 Danfoss District Energy...
Page 24: ...Operating Guide Termix BTD RO MIX Produced by Danfoss A S 02 2017...