background image

References

Related literature: 

PVG 32 Proportional Valve Group Technical Information

, 520L0344, BC00000038

Terms and definitions

Term

Definition

CB

Counterbalance

FC

Flow Control

NO

Natural Oscillation

PC

Pressure Control

Pl

Load pressure

PVG

Proportional Valve Group

Ql

Work Port Flow

Important user information

Danfoss is not responsible or liable for indirect or consequential damages resulting from the use or
application of this equipment.

The examples and diagrams in this manual are included for illustration purposes. Due to the many
variables and requirements associated with any particular installation, Danfoss cannot assume
responsibility or liability for the actual used bases on the examples and diagrams.

Reproduction of whole or part of the contents of this manual is prohibited.

The following notes are used to raise awareness of safety considerations.

W

Warning

Xxxxx

Identifies information about practices or circumstances that can cause a hazardous

situation, which may lead to personal injury or death, damage or economic loss.

C

Caution

Xxxx

Identifies information about practices or circumstances that can lead to personal injury

or death, property damage, or economic loss. Attentions help you identify a hazard,

avoid a hazard, and recognize the consequence

Note

Identifies information that is critical for successful application and understanding of the

product.

Identifies a typical use of a functionality or parameter value. Use recommendations as a
starting point for the final configuration process of the system.

Application Guide

Using flow or pressure control spools

About this document

 

©

 Danfoss | Feb 2017

AB00000079en-US0101 | 3

Summary of Contents for PVG 32













Reviews: