manualshive.com logo in svg

Danfoss PVG 16 PVAS, Technical Information

Share
Download
Danfoss PVG 16 PVAS Technical Information Download Page 6

Safety in Systems

All types and brands of control valves, including proportional valves, can fail. Therefore, the necessary

protection against the serious consequences of a functional failure should always be built into the

system.

General safety considerations

For each application an assessment should be made for the consequences of the system in case of
pressure failure and uncontrolled or blocked movements.

W

Warning

Because the proportional valve is used in many different applications and under different operating
conditions, it is the sole responsibility of the manufacturer to ensure that all performance, safety and
warning requirements of the application is met in his selection of products and complies with relevant
machine specific and generic standards.

Control system example

An example of a control system using an aerial lift is shown below:

Aerial lift

This example breaks down the control system into smaller bits explaining the architecture in depth. Even
though many Danfoss components are used in the PVG control system.

The function of the control system is to use the output from the PVE together other external sensors to
ensure the PLUS+1 main controllers correct function of the aerial lift.

Technical Information

PVG 16 Proportional Valve Group

General Information

 

6 | 

©

 Danfoss | December 2018

BC00000211en-000901

Summary of Contents for PVG 16 PVAS

















































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands