background image

Comatrol

www.comatrol.com

Schwarzmüller-Inverter

www.schwarzmueller-

inverter.com

Turolla 

www.turollaocg.com

Valmova

www.valmova.com

Hydro-Gear 

www.hydro-gear.com

Daikin-Sauer-Danfoss

www.daikin-sauer-danfoss.com

Danfoss Power Solutions 

is a global manufacturer and supplier of high-quality hydraulic and 

electronic components. We specialize in providing state-of-the-art technology and solutions that 

excel in the harsh operating conditions of the mobile off -highway market. Building on our extensive 

applications expertise, we work closely with our customers to ensure exceptional performance for a 

broad range of off -highway vehicles. 

We help OEMs around the world speed up system development, reduce costs and bring vehicles to 

market faster. 

Danfoss – Your Strongest Partner in Mobile Hydraulics.

Go to www.powersolutions.danfoss.com for further product information.

Wherever off -highway vehicles are at work, so is Danfoss. 

We off er expert worldwide support for our customers, ensuring the best possible solutions for 

outstanding performance. And with an extensive network of Global Service Partners, we also provide 

comprehensive global service for all of our components. 

Please contact the Danfoss Power Solution representative nearest you.

Products we off er:

 

Bent Axis Motors

 

Closed Circuit Axial Piston 

Pumps and Motors

 

Displays

 

Electrohydraulic Power 

Steering

 

Electrohydraulics

 

Hydraulic Power Steering

 

Integrated Systems

 

Joysticks and Control 

Handles

 

Microcontrollers and 

Software 

 

Open Circuit Axial Piston 

Pumps

 

Orbital Motors

 

PLUS+1

®

 GUIDE

 

Proportional Valves

 

Sensors

 

Steering

 

Transit Mixer Drives

Local address:

Danfoss can accept no responsibility for possible errors in catalogues, brochures and other printed material. Danfoss reserves the right to alter its products without notice. This also applies to products 

already on order provided that such alterations can be made without subsequential changes being necessary in specifications already agreed.

All trademarks in this material are property of the respective companies. Danfoss and the Danfoss logotype are trademarks of Danfoss A/S. All rights reserved.

Danfoss 

Power Solutions

22F, Block C, Yishan Rd

Shanghai 200233, China

Phone: +86 21 3418 5200

Danfoss 

Power Solutions GmbH & Co. OHG

Krokamp 35

D-24539 Neumünster, Germany

Phone: +49 4321 871 0

Danfoss 

Power Solutions ApS

Nordborgvej 81

DK-6430 Nordborg, Denmark

Phone: +45 7488 2222

Danfoss 

Power Solutions US Company

2800 East 13th Street

Ames, IA 50010, USA

Phone: +1 515 239 6000

520L0922

 • Rev EA • Sep 2013 

www.danfoss.com  

© Danfoss A/S, 2013-09

Summary of Contents for PLUS+1 Series













Reviews: