Instruction
Disassembling and assembling PAH 2-6.3, PAHT 2-6.3, PAHT C 2-6.3 and PAHT G 2-6.3
13
180R9094 / 521B0985 / DKCFN.PI.011.N5.02 / 09.2015
14. Tighten to a torque of 10 ±1 Nm.
13. Place the screw in the center hole.
16. Press the housing down by hand and
insert the screws.
15. Mount the pump housing using the pin
as guide.
18. Mount the two O-rings in the flange and
the O -ring on the front cover.
17. Tighten the screws to a torque of 13 Nm.
Alignment
hole
Guide pin
