background image

Danfoss Commercial Compressors http://cc.danfoss.com

 8510223 P01-A

Danfoss can accept no responsibility for possible errors in catalogues, brochures and other printed material. Danfoss reserves the right to alter its products without notice. This 

also applies to products already on order provided that such alterations can be made without subsequential changes being necessary in specifications already agreed. All trade-

marks in this material are property of the respective companies. Speerall

®

, Danfoss and the Danfoss logotype are trademarks of Danfoss A/S. All rights reserved.

• use of a refrigerant or lubricant not approved by 
Danfoss Commercial Compressors,
• any deviation from recommended instructions per-
taining to installation, application or maintenance,
• use in mobile applications (boats, trains, trucks, 
etc.) or under explosive atmospheric conditions 
(the  compressor  connecting  box  is  not  explo-

sion-proof).

The date of production of the compressor is indica-
ted on the nameplate. Ensure that the model and 
serial number information are always transmitted 
with any claim filed regarding this product.

Summary of Contents for Maneurop VTZ Series









Reviews: