8.
Store/Restore
Use 0-50 parameter, app uses intelligence and provide various option for
copy & restore the setups either to drive or internal memory
9.
Disconnect the drive
applicable for android devices, once disconnected the LCP-103 will
broadcast
10.
Vibrate
Based on native settings for alarm/warning notifications
11.
Graphs
All numerical parameters have scope functionality embedded, this helps to poll
the read-out values in graph
12.
Multi-Language
app settings will help change different options (German/English)
13.
Demo Mode
Helps to learn/demonstrate/promote
Hot-Swap/Plug-n-Play
The device is ready to connect/how-swap when the drive is powered-on.
When you connect to any drive (one to another), the wireless id will be populated from the drive.
Hence, the app shall be reconnected to the new network id.
30-9 Group
This group will have the special parameters like wireless id, password, safe parameter, which will
be saved to the drive. This group is accessible from MCT-10 or Graphical keypad LCP. This is not
available in app due to security limits.
Safe Parameter – option for the user to select the behavior when the app crashes/battery
down/connection lost, etc. whether the drive to stop or continue the ongoing process.
In case if you need any further assistance, please contact Danfoss representative.
