Step 3: The default password is ‘Danfoss1933’, after successful pairing the app will ask you to
change the default network id and password. In this case the password is mandatory field, while
the network id is an option field.
Step 4: You can skip changing the default id’s. But this will allow you to connect and perform the
drive operations only for 10 minutes, later the drive will close the connection.
Step 5: On successful change of id’s, your connection will close automatically and you need to
reconnect the drive as per step 2. Once gain the app will not ask you to change the password,
since you have changed the default id’s which is advised due to security risks.
Step 6: The app will show the status screen by default, where you will see the current setup id &
all the parameters which was configured earlier through MCT10/LCP-102
Additional Features – App
MyDrive® Connect app is designed with similar navigational structure like LCP-102, hence the
initial learning & adaptations are much easier. few more extended functionalities are listed below
which helps improve the usability better.
1.
Widget
Dynamically change the type of widget & also change the parameters
2.
Search
Parameter search using ID
3.
Drive Identification
Identify the drive using led winking
4.
Push Notification
when the app is in background, push notification helps pop-up the
alarm & warnings
5.
Authentication
Allows read/write (or) read parameters
6.
Drive Profile
Read drive profile
7.
Share Logs
Share the alarm/warning logs through email
