Cup and cable replacement
The case (cup) will need to be removed to install the cable.
The label from the old case will need to be put back on the new case otherwise all information about the
joystick is lost.
The cable will need to be removed to install the new case.
on page 4, step 4, in order to replace either the cup or cable.
Items and grip disassembly
In order to remove a push button, roller, or rocker, the cable and case will need to be removed, wires
unplugged and pulled through.
Rollers can only be replaced on analog joysticks.
on page 6, it is necessary to open the PR7 grip in order to replace the desired
items.
Items replacement
After step 2, under
on page 6 it is necessary to open the PR7 grip in order to replace the
desired items.
1. Remove all the screws to open the grip.
Service Manual
JS1-H Serviceability for IP54 Joysticks
PR7
20 |
©
Danfoss | July 2019
AX311058842185en-000103
