Service guide
Disassembling and assembling iSave 40
10
180R9242 | 521B1213 | DKCFN.PI.003.R3.02 | 04.2016
10. Position the sealing plate on the guide pin.
Ensure correct choice of sealing plate.
Only one sealing plate fits the guide pin.
11. Position the 8 pins in the rotor. 2 pins in
each hole.
12. By using the handle tool provided, carefully
lever the rotor into the stator.
14. Orient the vanes with correct end into
rotor. See the arrow below.
13. Fit the 8 vanes into each slot. Notice vane
position. Place the straight site of the vane
onto the pin with the mark downward.
15. Assemble the new O-ring on the adapter
flange.
No mark on
this side.
