Service instruction
Disassembling and assembling iSave 21
9
180R9219 / 521B1171 / DKCFN.PI.003.K3.02 / 11.2013
11. Fit the guide pin in the flange.
13. Position the port plate over the guide pin.
Note: Make sure that the guide pin is located
in the locating hole in the port plate .
There are two different port plates in the iSave. One of them can be mounted on both flanges in
the pressure exchanger. Make sure that they are assembled on the right flange.
12. Location hole in port plate.
14. Gently guide the cylinder barrel into the
bearing in the flange.
16.
Wrong!
large center hole.
15. Check the next port plate is correct.
Correct small
center hole
Wrong! large
center hole
