Danfoss iSave 21, User Manual

Page: 23 / 106

User manual iSave 21
23
180R9221 / 521B1174 / DKCFN.PS.003.A1.02
6.4 Piping and joints
Piping material and schedule is of high importance. The strength of the Victaulic® connec-
tions is influenced by the material used for both the Victaulic® clamps and the hard piping.
The hard piping and connections used must be of proper design and must be installed in
accordance with the manufacturer’s recommendations.
Hard piping to the iSave must be properly aligned to avoid stress on the iSave port connec-
tions. Pipe connections must be aligned as shown in the figures below.
Don’t use the iSave as a strain for hard piping.
The hard piping and connections used must be of proper design and must be installed in
accordance with the manufacturer’s recommendations.
A failure to comply with this will or may result in personal injury and/or damage to the
iSave.
Misalignment of the hard pipes may place stress on the iSave port connection and may
damage the iSave.
!
Correct piping alignment Incorrect piping alignment
Incorrect piping alignment