8 | AX450533577373en-000201
© Danfoss | Climate Solutions | 2023.07
Assembly
4 Assembly
We recommend cleaning the inside of the case before the installation.
There must not be any particles and dirt in the compressor.
To assemble, reverse the order of the steps. Note any particular features such as observance of different torques.
4.1 Connecting the stator to the motor housing
WARNING
The heavy weight of the stator can potentially be dangerous; risk of falling, danger of crushing.
X
Use a suitable hoist for the removal.
X
Note the direction of the feather key — stator.
You must align the parts in order to install them.
HG7/HG8/HG88e
X
Do not damage any cables and components
. Push the stator with the cables leading into the motor housing as far
as it will go. At the same time, carefully pull the cables upwards through the terminal board opening.
¾
Align the stator so that the feather key can be pushed in the the groove flush with the housing surface.
max.
75kg
