General Installation Guidelines
Planning
It is recommended to sketch a plan of the layout for the heating system installation. Mat/cable
location, sensor placement, junction boxes, conduits and the location of drains and other
obstructions should be noted.
Mat Alterations
The GX heating mats can be altered to accommodate drains, obstructions or bends in the layout.
By carefully cutting the mat tape, many patterns and designs can be created The figure below
illustrates this.
Free Cable and Cable Strapping
Should the Danfoss cable strapping be used for the GX cable, follow the instructions below for
ease of installation.
Attach the Danfoss
strapping to the
ground surface
(3’ apart)
Place the GX cable
(3” standard
spacing)
Clip the GX cable
in place
5
Copyright
20
17
Danfoss
TEL:
1-888-326-3677
.
FAX:
416-352-5981
VIAPF222 05/17
