Danfoss Heating
15
GB
To perform a standard copy operation:
a) Press
CH
to select the channel.
b) Press
PROG
to go to event programming.
c) Press
DAY/HOL
to select the day to copy to.
d) Press
COPY/i
to copy the previous day’s events to the displayed
day.
Advanced Copy
The Advanced Copy function is available in
7 day mode
only. This
allows any day to be copied to any other day, or days.
To use the Advanced Copy function, go into the event programming
using the
PROG
button, then:
1) Press
DAY/HOL
to select the day to be copied from.
2) Press
COPY/i
to copy from the selected day.
When selected, the day will begin to fl ash.
3) Press
DAY/HOL
to select the day to be copied to.
4) Press
COPY/i
to copy to the selected day.
5) Repeat steps 3 and 4 to select and copy other days.
6) To stop copying, use the
DAY/HOL
button to go back to the
fl ashing day and press the
COPY/i
button. The previously
fl ashing day will stop fl ashing to indicate it has been de-selected.
NOTE:
When a day has been copied to, it will remain visible and not
fl ashing when the
DAY/HOL
button is used to select other days.
Channel Copy
Channel Copy is used to copy events from one channel to another
channel.
To perform a Channel Copy operation:
a) Press
CH
to select the channel to copy to.
b) Press
COPY/i
to copy from the previous channel.
