Instruction FH-CWD Thermostat
5
Produced by Danfoss Floor Heating Hydronics 05.2011
VI.CU.B2.02
Display of Room Temperatures - fig. 3
• The actual room temperature is shown in the display
as default
.
Setting of Room Temperature Fig. 1
• Press the to set the desired room temperature
value,
is shown in the display.
• When releasing the selector the display returns
to actual room temperature
.
5. Choosing room temperature
control or both room and floor
temperature control
Turn OFF the thermostat by pressing Fig. 1
.
• Press and hold Fig. 1
for 10 seconds. The display
will show 01.
• Press Fig. 1
to adjust desired controltype.
01=room temperature control, only with room
sensor, no floor sensor, check and setting only room
temperature.
02=both room and floor temperature control, with
room sensor and floor sensor, check and setting room
temperature and maximum floor temperature limit.
Factory setting is 01.
Summary of Contents for FH-CWD
Page 1: ...Instruction FH CWD Thermostat...
Page 16: ...www heating danfoss com...
