FC 300 Instruction Manual
How to Read this Instruction Manual
"
How to Read this Instruction Manual
This Instruction Manual will help you get started, install, program, and troubleshoot
your VLT
®
AutomationDrive FC 300.
The FC 300 comes in two shaft performance levels. FC 301 ranges from scalar (U/f) to VVC+,
and FC 302 ranges from scalar (U/f) to servo performance.
This Instruction Manual covers both FC 301 and FC 302. Where information covers both series, we
refer to FC 300. Otherwise, we refer specifically to either FC 301 or FC 302.
Chapter 1,
How to Read this Instruction
Manual
, introduces the manual and informs you
about the approvals, symbols, and abbreviations
used in this literature.
Page divider for How to Read this Instruction Manual.
Chapter 2,
Safety Instructions and General
Warnings
, entails instructions on how to
handle the FC 300 correctly.
Page divider for Safety Instructions and General Warnings.
Chapter 3,
How to Install
, guides you through
mechanical and technical installation.
Page divider for How to Install
3
MG.33.A4.22 - VLT is a registered Danfoss trademark
