Danfoss ET5020, Operator'S Manual

Page: 50 / 92

6. Check the workpiece.
7. If the dimension is reached: manufacture other identical workpie-
ces.
8. If the dimension is not reached: Adjust difference on control
and/or in the micrometer, repeat the forming process and check
the workpiece.
5.6 Stop
1. Complete the forming process.
2. Deposit the work piece outside the machine.
3. Deactivate the main switch (1).
4. Check the machine for contamination, leaks and external da-
mage.
5. Check the crimping tool and retaining bolts for contamination,
damage and secure fitting.
6. Check the oil level.
7. Remove contamination, dust and chips using a vacuum.
Inform the fitter in case of damage or other irregularities.
5.7 Emergency stop
In case of an emergency
Immediately press the emergency-stop button (1) in cases of
emergency. The crimping tool movement will be stopped. The drive
unit is shut down.