Danfoss ET5020, Operator'S Manual

Page: 40 / 92

5 Operation
5.1 What you have to observe
The operator has received the Operation Manual from the owner, has
read and understood it and will observe it.
Before starting and/or re-starting
•
Ensure sufficient illumination of the working area of the ma-
chine/unit.
During operation
•
Observe the safety instructions on the machine/unit.
•
Make sure that no other persons stay in the working area.
•
Use appropriate aids to handle heavy workpiece.
•
Each movement of the hand must be observed.
•
The control cabinet must be closed securely.
•
Eating, drinking and smoking at the workplace is prohibited.
•
Wear close-fitting clothes.
•
Do not wear watches or jewellery.
5.2 Activation
1. Check that there is no emergency-stop situation.
2. Activate the power switch (1). The control starts the operating
system; the starting screen showing the UNIFLEX logo will
appear after a few seconds.