Danfoss EFIT 850, Installation And User Manual, Page: 6 / 36

6
User Manual
Combined view (default):
The combined view shows the status of both systems at
the same time .
System A
is shown on the upper display
line, and
System B
is shown on the lower display line .
This view gives the user a quick overview of all the sys-
tems .
Flipped view:
The flipped view shows the status of 1 system at a time .
The status of each system is shown for 5 seconds .
This view gives the user more detailed information about
each system .
The user can always press to get more information about the current status
irrespective of view selected .
Menu system
The menu system is navigated by the keys and .
No matter if the EFIT™ 850 controls one
or two systems, the look and use of the
menu system is always the same . This is
obtained by making the entry to each
system in the main menu . The possibili-
ties and settings for each system are first
accessible after the user has selected the
desired system .
To the right is given an example of the
main menu and the menus for
System A
and
System B
.
Please notice, that only a few of the
menus for each system are shown!
For a complete overview of the menu system, please refer to: Appendix A: “Menu
system” .
A:Roof 
B:Ground 
A:Roof 
>>
Standby
B:Ground 
>>
Melting
S ystem
B
S ystem
A
A:Roof ˜
ÚStandby B:Ground ¯ˆı
ÚMelting
Select system A:
Roof
Select system B:
Ground
View alarm
menu
5s
A:Roof ˜
B:Ground ¯ˆı
5s
View and set
operating mode
View sensor
measurements
View and set
operating mode
View sensor
measurements
Only visible when S ystem B is installed !
A:Roof ˜
ÚStandby B:Ground ¯ˆı
ÚMelting
Select system A:
Roof
Select system B:
Ground
View alarm
menu
5s
A:Roof ˜
B:Ground ¯ˆı
5s
Only vis ible when
S ys tem B is ins talled !
S ys tem menu
(S ys tem A)
A:Roof ˜
B:Ground ¯ˆı
S ys tem menu
(S ys tem B)