Danfoss ECtemp 316, Installation Manual

Page: 8 / 16

Danfoss ECtemp 316
Installation Guide 8
3 Settings
A Night set-back
B Minimum temperature
limiter
C Hysteresis
3�1 Hysteresis
When the thermostat is used to apply with either heat-
ing systems or refrigerating systems, and the requested
temperature is between -10 °C to +50 °C, then it is recom-
mendable also to adjust the hysteresis
C
according to the
requested regulating range.
As an example if the temperature is set at 18 °C and the hyster-
esis at 3 °C the thermostat will switch on at 18 °C and off at 21 °C.
For controlling of room temperature the Hysteresis is rec-
ommended to the set point of 1 °C.
3�2 Minimum Temperature Limiter
When the thermostat is used in connection with snow and
ice melting systems, it is recommendable also to use and
adjust the minimum temperature limiter (
B
) which ensures