Danfoss ECtemp 316, Installation Manual

Page: 3 / 16

Danfoss ECtemp 316
3 Installation Guide
1 Introduction
ECtemp 316 is an electronic thermostat to be installed in
electric cabinets with DIN rail attachment. The thermostat
must be installed via an all-pole disconnection switch.
ECtemp 316 applies to the control of room temperature,
floor temperature, ventilation, cooling or to the control of
snow melting in gutters and similar installations.
For measuring purposes either a wire sensor or an external
air sensor is used.
Table of Contents
1 Introduction � � � � � � � � � � � � � � � � � � � � � � � 3
1.1 Technical Specifications . . . . . . . . . . . . 4
1.2 Safety Instructions . . . . . . . . . . . . . . . . 5
2 Mounting Instructions � � � � � � � � � � � � � � � � � 6
3 Settings � � � � � � � � � � � � � � � � � � � � � � � � � � 8
3.1 Hysteresis . . . . . . . . . . . . . . . . . . . . . 8
3.2
Minimum Temperature Limiter . . . . . . . . 8
3.3 Temperature Set-back. . . . . . . . . . . . . . 9
4 Warranty� � � � � � � � � � � � � � � � � � � � � � � � � 10
5 Disposal Instruction � � � � � � � � � � � � � � � � � 12