8
06/2015
VIJPD102
Danfoss Heating Solutions
1.7 Setting time and date for the first time
1.
2.
When the batteries are installed the time
flashes on the display -
23:59.
a. Set hours with
,
press to confirm.
b. Set minutes with
,
press to confirm.
c. Set date with
,
press to confirm.
When flashes, press
to confirm your
settings.
The display now switches to the Installation
Mode a large
M
flashes on the screen.
1.8 Installing eco
1.
Note! Activate Installation Mode
2.
Ensure you are in Installation Mode before you
mount eco. If not, press for 4 seconds.
A large
M
is flashing in the display to indicate
that Installation Mode is activated.
3.
4.
Screw eco onto the adapter and tighten by
hand (max. 5 Nm).
While slightly pressing forward, turn eco
clockwise untill it locks, then tighten.
Press for 4 seconds to fix eco.
Installation Guide
eco Intelligent Radiator Thermostat