12 06/2015
VIJPD102
Danfoss Heating Solutions
3. Display and menus
3.1 Home Screen
When pressing the Home Screen appears with basic information on programming and operation
of eco:
Time is shown with the dashed circle, each segment representing
30 minutes.
• Black segments = periods with comfort temperature.
• White segments = periods with setback temperature.
• Flashing segment = current time.
The chosen programme P0, P1, P2, (Travel)
or (Pause)
Day of week
The set temperature*
*
eco is displaying the
set temperature
, not the
measured room temperature
.
3.2 Programme menu
1.
To select the Programme menu:
If the display is off, press , then press again
to open the programme menu.
Use
to shift between the programmes, press
to confirm. The chosen programme is flashing.
Display symbols in the Programme menu
P0
Programme without automatic temperature reduction. This programme maintains the
comfort temperature of 21 degrees constant all day and night.
P1
Saving programme which as default lowers the temperature to 17 °C at night (22:30 -
06:00 hrs). Time and temperature are configurable.
P2
Extended saving programme which as default lowers the temperature to 17 °C at
night (22:30 - 06:00 hrs), and during the day on weekdays (08:00 - 16:00 hrs). Time and
temperature are configurable.
Pause program. The thermostat will maintain a constant temperature of 4-10 °C in the
room, ensuring frost protection.
Note! Symbols must be flashing to be activated.
User Guide
eco Intelligent Radiator Thermostat