Danfoss DHP-AL, User Manual

Page: 18 / 42

Danfoss – 18 VUBMF102
Message Meaning
SENSOR Alarm that indicates a faulty sensor.
HEATPUMP
START
Indicates that the compressor will start within 30 seconds. The brine
pump has started.
H
ADD.HEAT
Indicates that heat production is active with both compressor and
auxiliary heater.
START --MIN Indicates that there is a heating production demand and will start in the
specified number of minutes.
ADD. HEAT Indicates that there is an auxiliary heater demand.
DEFROST Indicates the temperature for defrost.
3 .2 Menus
3 .2 .1 Main menu INFORMATION
The control computer’s main menu, INFORMATION, is opened by pressing the right or left
button once.
Figure 12: The main menu INFORMATION for DHP-AL with sub menus .
Use the up and down buttons to select the desired sub-menu and open the menu by
pressing the right button once. To go back to the display’s starting point, press the left
button once.
Return
Cursor
OPERATION ---
HEATCURVE
TEMPERATURE
OPERAT.TIME
DEFROST
INFORMATION
Sub-menus