Danfoss DEVIreg Smart Installation Manual Download Page 3

Page: 3 / 28

DEVIreg™ Smart

Installation Guide

• A touchscreen display with light.
• An easy-to-follow menu-driven programming and

operation.

• An installation wizard with room/floor type-specific

setup (requires an app).

•  Support for multiple frame systems.
•  Compatible with several 3rd party NTC sensors.
•  Thermostat settings can be specified before instal-

lation and imported to the thermostat using a
web-generated code, or copied from a thermostat in
a similar installation.

• Smart access to thermostat settings after installa-

tion by using a web code interface, for easy setup or
remote troubleshooting.

• DEVIreg™ Smart can be used as a switch for On/Off

systems

Regarding Connectivity:

• 10 smart devices (like Smartphone or Tablet) can be

connected to 1 thermostat/switch.

• 2 smart devices can be in contact with the thermo-

stat/switch at the same time.

DEVIREG™ SMART REQUIRES WORKING WI-FI
TO FUNCTION

Summary of Contents for DEVIreg Smart





























Search results

Summary of Contents for DEVIreg Smart

Reviews:

Related manuals for DEVIreg Smart

Brands by name

Popular brands

Danfoss DEVIreg Smart, Installation Manual

Search results

Summary of Contents for DEVIreg Smart

Reviews:

Related manuals for DEVIreg Smart

Brands by name

Popular brands