Installation and User Guide
DEVIreg™ Multi
FEC | Produced by Danfoss ©
21
Screen example:
Another possibility to see
Sensor Type
is to use the following sequence:
EN: Main Screen – Enter to Main Menu – Channels data – Channel #X
EN: Main Screen – Enter to Main Menu – Channels data – Channel #X
4.4.4
PR or Power Regulation mode
Power regulation is time proportional power regulation mode with a simple duty cycle generator
with time set up during which heating is turned on within the period .
This mode can be individually set up for any
Channel
.
The
PR
logic algorithm is the following: if time counter is below set up cycle time when
heating should be on (
On time
) then heating is turned on, and if time counter is above set
up time then heating is turned off just up to the end of mode period .
