Installation and User Guide
DEVIreg™ Multi
FEC | Produced by Danfoss ©
20
Line of the
Main screen
with
1S
mode data for one
Channel
is shown on the picture below:
Channel
number
Real sensor
Temp.
Heating
status:
On
or
Of
Set up
Temp.
4.4.3.2 Sensor Type set up
1S
control mode can be set up with different 8 types of temperature sensors .
Sensor unit can be selected via software connected to Channel’s analog inputs AI1-AI7 between:
NTC15k
(15 kOhm @ 25 °C),
NTC10k
(10 kOhm @ 25 °C),
NTC5k
(5 kOhm @ 25 °C),
NTC2k
(2 kOhm @ 25 °C),
NTC100
(100 kOhm @ 25 °C),
NTC16k
(16,7 kOhm @ 100 °C),
PT1000
(1000 Ohm @ 0 °C),
Ni100
(100 Ohm @ 0 °C) .
Setting of
Sensor type
can be done by the following menu sequence:
EN: Main Screen – Enter to Main Menu – Channels settings – Channel #X – Sensor
type – {Enter – Up/Down ( PT1000/ NTC10k/ NTC100/ Ni100/ NTC2K/ NTC16k/
NTC5k/ NTC15k) }
EN: Main Screen – Enter to Main Menu – Channels settings – Channel #X – Sensor
type – {Enter – Up/Down ( PT1000/ NTC10k/ NTC100/ Ni100/ NTC2K/ NTC16k/
NTC5k/ NTC15k) }
NB: Setting is possible/visible for
Active Channels
only.
Chosen
Sensor type
can be found in the
Channel Data
screens with the following menu
sequence:
EN: Main Screen – Down
.
EN: Main Screen – Down.
