7
VI.UH.R2.1C
Produced by Danfoss Floor Heating Hydronics 03.2007
Instruction CF-RF Room Thermostat with Infrared Floor Sensor
Setting of room temperature
. Make sure actual room temperature is shown
in the display
2.
Press the up/down selector to set the
desired room temperature value. SET is shown
in the display
3. When releasing the up/down selector the
display returns to actual temperature
Note: The thermostat regulates the floor heating system
according to room temperature set point, within the
maximum and minimum limitations defined for the floor
surface temperature
Room temperature limitation
. Make sure actual room temperature is shown
in the display
2.
Press the push button until SET MAX is
shown in the display
3. Press the up/down selector to set the
maximum room temperature limitation
4. Press the push button shortly, SET MIN is
shown in the display
5. Press the up/down selector to set the
minimum room temperature limitation
6.
Press the push button shortly and the
actual floor surface temperature is shown in
the display
GB
