5
VI.UH.R2.1C
Produced by Danfoss Floor Heating Hydronics 03.2007
Instruction CF-RF Room Thermostat with Infrared Floor Sensor
Activate Install mode on Master Controller
- fig. 1.
• Use the menu selection button to select the
Install mode. Install LED flashes
• Activate Install mode by pressing OK
.
Install
LED goes ON
Activate Install mode on Room Thermostat
• Press the push button
.
LED
and
flicker
during communication
Select output on Master Controller
• All available output LEDs on Master Controller
light up, and the first of them flashes
• Press output selection button , to select
desired output (flashes) and accept with OK
• All output LEDs
go OFF. Selected output
stays ON shortly
Room Thermostat installation status
• Satisfactory - LED goes OFF
• Not satisfactory - LED flashes 5 times
Note: A Room Thermostat can be assigned to several
outputs if needed by repeating the installation process.
GB
